LAMP Web Server¶
This tutorial provides instructions on how to set up a LAMP web server on Clear Linux* OS and how to use phpMyAdmin* to manage an associated database. Note that this tutorial installs MariaDB*, which is a drop-in replacement for MySQL*.
In order to create a web server using Clear Linux OS as the host OS, your host system must be running Clear Linux OS. This tutorial assumes you have installed Clear Linux OS on your host system. For detailed instructions on installing Clear Linux OS on a bare metal system, visit Install Clear Linux* OS from the live desktop.
This tutorial covers:
Apache is an open source HTTP web server application that can run on several operating systems, including Clear Linux OS. Go to the Apache HTTP Server Project for more information.
Install the httpd bundle¶
The httpd bundle contains the packages needed to install the Apache software bundle on Clear Linux OS.
Before you install new packages, update the Clear Linux OS with the following console command:
sudo swupd update
To install the bundle, enter the following command:
sudo swupd bundle-add httpd
Start the Apache service and set it start automatically on boot, enter the following commands:
sudo systemctl enable --now httpd.service
To verify that the Apache server application is running, open a web browser and navigate to: http://localhost.
If the service is running, a confirmation message will appear, similar to the message shown in figure 1.
index.htmlfile is located in the
/var/www/htmldirectory of your host system. You will copy this file into a new location after you modify the configuration in the next step.
Clear Linux OS is designed to be a Stateless operating system which means that you
must create an optional configuration file to override the default values.
The default location of the Apache configuration file,
is located in the
/usr/share/defaults/httpd directory. Clear Linux OS can
override this directory as part of the stateless paradigm. This default
.conf file includes the following directives that allow for additional
locations of configuration definitions:
# Virtual hosts IncludeOptional /usr/share/defaults/httpd/conf.d/*.conf IncludeOptional /usr/share/defaults/httpd/conf.modules.d/*.conf IncludeOptional /etc/httpd/conf.d/*.conf IncludeOptional /etc/httpd/conf.modules.d/*.conf
In this section you will define your own httpd.conf file to override the default values, and define a custom DocumentRoot for your web server.
Create the directory structure for
sudo mkdir -p /etc/httpd/conf.d
Create and open the
httpd.conffile in your new
sudo nano /etc/httpd/conf.d/httpd.conf
httpd.conf. Copy the content listed below into the new
# # Set a new location for DocumentRoot # DocumentRoot "/var/www/tutorial" # # Relax access to content within /var/www/tutorial for this example # <Directory "/var/www/tutorial"> AllowOverride none Require all granted </Directory>
Create a new
DocumentRootdirectory structure and copy the
sudo mkdir –p /var/www/tutorial cd /var/www/tutorial sudo cp /var/www/html/index.html .
To ensure a successful setup, edit the new
index.htmlfile with an obvious change.
sudo nano index.html
For example, we changed the default message
“It works from its new location!”
sudo systemctl restart httpd.service
Go to http://localhost to view the new screen. You should see your updated default message from step 5.
Change the configuration back to the default
/var/www/htmllocation. To do this, edit the
/etc/httpd/conf.d/httpd.conffile again and replace any instance of /var/www/tutorial with /var/www/html.
sudo nano /etc/httpd/conf.d/httpd.conf
sudo systemctl restart httpd.service
Go to http://localhost and verify that you can see the default screen again.
Optionally, remove the /var/www/tutorial directory you previously created.
sudo rm /var/www/tutorial/index.html sudo rmdir /var/www/tutorial
An Apache installation allows you to display static web pages. Enabling PHP allows you to generate and display dynamic web pages. To add this functionality to your web server, install PHP on your system.
To get the php components, enter the following command:
sudo swupd bundle-add php-basic
To enable PHP and set it to start automatically on boot, enter the following commands:
sudo systemctl enable --now php-fpm.service sudo systemctl restart httpd.service
After restarting the Apache service, test your PHP installation.
Create and open a file named
/var/www/html/directory using a text editor.
sudo nano /var/www/html/phpinfo.php
Add the following line to the file:
<?PHP phpinfo() ?>
Go to http://localhost/phpinfo.php.
Verify that the PHP information screen appears, similar to figure 2:
If the PHP information screen is displayed, you have successfully installed the PHP components and are now ready to add your database application to complete your LAMP server implementation.
Install MariaDB to store content. MariaDB is a drop-in replacement for MySQL and is available in the database-basic Clear Linux OS bundle.
To install the database-basic bundle, enter the following command:
sudo swupd bundle-add database-basic
To start MariaDB after it is installed and set it to start automatically on boot, enter the following commands:
sudo systemctl enable --now mariadb
To check the status of MariaDB, enter the following command:
sudo systemctl status mariadb
Press Ctrl + c or q to exit.
With the MariaDB service running, we can perform some basic security hardening.
To add a basic layer of security, enter the following command:
Respond to the questions that appear in the script below.
Our suggested responses follow each question.
Enter current password for root (enter for none):
In order to secure MariaDB, we need the current password for the root user. For a newly installed MariaDB without a set root password, the password is blank. Thus, press enter to continue.
OK, successfully used password, moving on... Set root password? [Y/n]
Set the root password to prevent unauthorized MariaDB root user logins. To set a root password, type ‘y’.
Type the desired password for the root user.
Re-enter new password:
Re-type the desired password for the root user.
Password updated successfully! Reloading privilege tables.. ... Success! Remove anonymous users? [Y/n]
By default, a MariaDB installation includes an anonymous user that allows anyone to log in to MariaDB without a user account. This anonymous user is intended only for testing and for a smoother installation. To remove the anonymous user and make your database more secure, type ‘y’.
... Success! Disallow root login remotely? [Y/n]
Normally, root should only be allowed to connect from the ‘localhost’. This ensures that someone cannot guess the root password from the network. To block any remote root login, type ‘y’.
... Success! Remove test database and access to it? [Y/n]
By default, MariaDB includes a database named ‘test’ which anyone can access. This database is also intended only for testing and should be removed. To remove the test database, type ‘y’.
- Dropping test database... ... Success! - Removing privileges on test database... ... Success! Reload privilege tables now? [Y/n]
Reloading the privilege tables ensures all changes made so far take effect immediately. To reload the privilege tables, type ‘y’.
... Success! Cleaning up...
All done! If you’ve completed all of the above steps, your MariaDB installation should now be secure.
Thanks for using MariaDB!
The MariaDB installation is complete, and we can now install phpMyAdmin to manage the databases.
The web-based tool phpMyAdmin is a straightforward way to manage MySQL or MariaDB databases. Visit the phpMyAdmin website for the complete discussion regarding phpMyAdmin, its documentation, the latest downloads, and other useful information.
In this tutorial, we use the latest English version of phpMyAdmin.
phpMyAdmin-<version>-english.tar.gzfile to your
~/Downloadsdirectory. Here, <version> refers to the current version available at https://www.phpmyadmin.net/downloads.
This example downloads and uses version 4.6.4.
Once the file has been successfully downloaded and verified, decompress the file and directories into the Apache web server document root directory. Use the following commands:
cd /var/www/html sudo tar –xzvf ~/Downloads/phpMyAdmin-4.6.4-english.tar.gz
To keep things simple, rename the newly created
phpMyAdminwith the following command:
sudo mv phpMyAdmin-4.6.4-english phpMyAdmin
You can use the phpMyAdmin web-based tool to manage your databases. Follow the steps below for setting up a database called “WordPress”.
Verify that a successful installation of all LAMP server components by going to http://localhost/phpMyAdmin. See figure 3.
Log in with your root userid and the password you set up when you ran the mysql_secure_installation command. Enter your credentials and select Go to log in:
Verify a successful login by confirming that the main phpMyAdmin page displays, as shown in figure 4:
Set up a database by selecting the Databases tab, as shown in figure 5.
Enter WordPress in the text field below the Create database label.
Select the utf8_unicode_ci option from the Collation drop-down menu beside the text field.
Set up user permissions by selecting the WordPress database located in the left panel. See figure 6.
Select the Privileges tab. Figure 6 shows its contents.
Click Add user account located at the bottom of the Privileges tab. The Add user account page appears, as shown in figure 7.
Enter the following information in the corresponding fields that appear in figure 7 above:
User name: wordpressuser
In the Database for user account section, select Grant all privileges on database “WordPress”.
At the bottom of the page, click Go.
If successful, you should see the screen shown in figure 8:
You have now created a fully functional LAMP server along with a WordPress*-ready database using Clear Linux OS.